Avaya 8800 Troubleshooting Manual page 260

Software troubleshooting tool configuration using ACLI
2. To ping an IPX device:
3. To ping an MPLS device:
Variable definitions
Use the information in the following table to help you use the ping <WORD 0-256>
command.
-d
-s
-I <1-60>
-t <1-120>
count <1-9999>
datasize <16-4076>
interface-port <value>
interface-mgmt <value>
interface-vlan <value>
260 Troubleshooting
<WORD 0-256> specifies the device by host name, IPv4 address <a.b.c.d>, or IPv6
address <x.x.x.x.x.x.x.x>.
pingipx <0x00:0x00:0x00:0x00.0x00:0x00:0x00:0x00:0x00:0x00>
[<1-9999>] [-s] [-q] [-t <1-120>]
<0x00:0x00:0x00:0x00.0x00:0x00:0x00:0x00:0x00:0x00> specifies
the IPX host in the net.node format.
ping-mpls ipv4 <prefix/len> [ttl <1-255>] [source <A.B.C.D>]
[count <1-1000>]
ping-mpls rsvp <WORD 0-32> [ttl <1-255>] [source <A.B.C.D>]
[count <1-1000>]
<prefix/len> specifies the IPv4 address and prefix length; <WORD 0-32
specifies the name of the label-switched path.
Variable
Comments? infodev@avaya.com
Value
Sets the ping debug flag. In debug mode, the ping
reply includes additional information about the device
being pinged.
Specifies that the IPv4 or IPv6 ping should be
retransmitted at continuous intervals at the interval
defined by -I <1-60>.
Specifies the interval between ping retransmissions
from 1 to 60 seconds.
Specifies the no-answer timeout from 1 to 120
seconds.
Specifies the number of times to ping the device from
1 to 9999. The default is 1.
Specifies the size of the ping packet in octets, either
16 to 4076, or 16 to 65487. The default is 16 octets.
Specifies the interface slot/port number.
Specifies the interface Ethernet management port
number.
Specifies the interface VLAN ID (1 to 4094).
July 2013