4. To show all the routes in the RTM, enter the following CLI command:
5. If the route has satisfied all the above conditions and it is still not selected, contact
Troubleshooting
================================================================
========
PIM Neighbor - GlobalRouter
================================================================
========
INTERFACE
ADDRESS
----------------------------------------------------------------
--------
Vlan4
2.2.2.1
Vlan5
3.3.3.1
Vlan6
4.4.4.1
Vlan7
5.5.5.1
Total PIM
Neighbors = 4
Also verify whether the RPF is reachable. If it is not, then the RPF interface may be
down.
show ip route info
OR
enter the following ACLI command
show ip route
Using the output from this command, you can verify whether the selected route is
the direct route. If it is a direct route, the PROT field displays LOC and the TYPE field
displays DB.
technical support.
UPTIME
1 day(s), 12:29:48
1 day(s), 12:29:48
1 day(s), 12:29:34
1 day(s), 12:29:34
Troubleshooting static mroute
EXPIRE
0 day(s), 00:01:28
0 day(s), 00:01:28
0 day(s), 00:01:41
0 day(s), 00:01:41
July 2013
375