Configuring Vlan Mac Filters For Pcap - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using ACLI
srcmac
<0x00:0x00:0x00:0x00:
0x00:0x00> [<1-6>]
tcp-port <0-65535>
[<0-65535>]
timer <WORD 1-7>
udp-port <0-65535>
[<0-65535>]
user-defined <0-9600>
<WORD 0-50>
vid <0-4092>
[<0-4092>]

Configuring VLAN MAC filters for PCAP

Use PCAP with VLAN MAC address (forwarding database) filters to reduce traffic flow on the
PCAP engine.
252 Troubleshooting
Variable
Specifies the MAC address of the source.
If the mask is set, then only the first few bytes are
compared. The default is 00:00:00:00:00:00, which
means this option is disabled.
<1-6>
parameter specifies an address range.
Specifies the TCP port of the packet.
The default is 0, which means this option is disabled.
Use the second
When set, PCAP is invoked when the first packet is
matched and stopped after the set value of time. After
starting the timer, the filter is disabled.
This option is active only when the action parameter is
set to trigger-on.
<WORD 1-7>
milliseconds. The default value is zero. Setting the value
to 0 disables the timer.
Specifies the UDP port of the packet.
The default is 0, which means this option is disabled.
Use the second
Sets a user defined value on which to match the packet.
The user can define a pattern in hex or characters to
match (
to start the match (
of pattern is null ('') which means that this field is
discarded. To disable this option, set the pattern to null
('').
Specifies the VLAN ID of the packet.
The default is 0, which means that this option is
disabled.
Use the second
Comments? infodev@avaya.com
Value
is the mask of the source MAC address. This
<0-65535> to specify a range.
is a value from 100 to 3600000
<0-65535> to specify a range.
<0-9600> ). The user can also specify the offset
<WORD 0-50>
<0-4092> to specify a range.
). The default value
July 2013