Avaya 8800 Troubleshooting Manual page 150

Software troubleshooting tool configuration using CLI
delete
enable <true|false>
info
mode <tx|rx|both|rxFilter|
txFilter|bothFilter>
remote-mirror-vlan-id
<vid>
remove {mirrored-ports
<port>|mirroring-mlt
150 Troubleshooting
Variable
Comments? infodev@avaya.com
Value
remote-mirror-vlan-id <value>
•
configures the VLAN ID for the remote mirrored
packet (see description for remote-mirror-vlan-
id).
mirroring-vlan <value>
•
mirroring VLAN ID, from 1 to 4094.
• mirroring-mlt <value>
mirroring MLT ID, from 1 to 256.
To modify a port mirroring instance, first disable
the instance. Also, to change a port, VLAN, or
MLT entry, first remove whichever parameter is
attached to the entry, and then add the required
entry. For example, if an entry has mirroring ports
already assigned, then the ports have to be
removed using the remove mirroring-
ports command, and then, to assign a VLAN
to the entry, use the add mirroring-vlan
command.
Deletes an entry from the mirror-by-port table.
To change a port mirroring configuration, first
disable it.
Enables or disables a mirroring port already
created in the mirror-by-port table.
Displays current port mirroring settings.
Configures the mirroring mode. The default is
rx.
• tx mirrors egress packets.
• rx mirrors ingress packets.
• both mirrors both egress and ingress packets.
• rxFilter mirrors and filters ingress packets. If
you use the rxFilter option with an R series
module, you must use an ACL-based filter.
• txFilter mirrors and filters egress packets.
• bothFilter mirrors and filters both egress and
ingress packets.
Configures the remote mirror VLAN ID.
• <vid> is the ID of the VLAN in the range of 0 to
4094.
Removes ports, an MLT, or a VLAN from the
mirroring instance.
specifies the
specifies the
July 2013