Checking Cpu And Memory Utilization; Managing A Wsp - Avaya 8800 Troubleshooting Manual

6. In the AMDC, BMDC, or PWC, you can check the join status:

Checking CPU and memory utilization

To help you troubleshoot the WCP, use the following commands to check the CPU and memory
utilization.
Procedure
1. On the WCP, check the CPU utilization with the following command:
2. Check the memory utilization:

Managing a WSP

Use the following steps to troubleshoot why a WSP is not being managed by a WCP.
Procedure
1. From the AMDC, list the WSPs:
2. Verify that a circuitless IP address is configured in the ERS 8800/8600 and that
3. Use ping to check the reachability of the WCP IP address from ERS 8800/8600
Troubleshooting
wireless controller leave-domain
wireless controller join-domain domain-name <domainName> mdc-
address <AMDC System IP Address>
show wireless controller domain-membership
show wireless domain peer-controller status
or you can check from the joining controller
show wireless controller status
show cpu-utilization
show memory-utilization
show wireless wsp status
If a WSP MAC entry is not listed, then that WSP is not being managed by any of
the WCPs in the mobility domain.
wireless is enabled.
using the circuitless IP address as the source:
ping <wcp ip address> source <circuitless ip address>
Troubleshooting WCP and AP problems
July 2013 427