Avaya 8800 Troubleshooting Manual page 161
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages) ,
- Configuration manual (226 pages)
Table of Contents
Advertisement
Configure the VLAN and remote mirroring on switch S3.
Procedure steps
1. Configure the VLAN:
2. Configure remote mirroring:
3. Show remote-mirroring information to get the correct destination MAC address for
Configure switch S1.
Procedure steps
1. Configure the VLAN:
2. Configure port mirroring:
3. Configure remote mirroring:
Troubleshooting
ERS-8610:5# config filter acl 1 ace 2 ip ip-protocol-type eq
tcp
ERS-8610:5# config filter acl 1 ace 2 protocol tcp-dst-port
eq 20-500
ERS-8610:5# config filter acl 1 ace 2 enable
ERS-8610:5# config vlan 10 create byport 1
ERS-8610:5# config vlan 10 ports add 1/15,2/8
ERS-8610:5# config ethernet 1/15 remote-mirroring create
ERS-8610:5# config ethernet 1/15 remote-mirroring add-vlan-id
10
ERS-8610:5# config ethernet 1/15 remote-mirroring mode
termination
ERS-8610:5# config ethernet 1/15 remote-mirroring enable true
switch 1:
ERS-8610:5# config ethernet 1/15 remote-mirroring info
ERS-8610:5# config vlan 10 create byport 1
ERS-8610:5# config vlan 10 ports add 1/1
ERS-8610:5# config diag mirror-by-port 1 create in-port 1/15
out-port 1/1 mode rx enable true remote-mirror-vlan-id 10
ERS-8610:5# config ethernet 1/1 remote-mirroring create
ERS-8610:5# config ethernet 1/1 remote-mirroring dstmac
00:e0:7b:82:9d:9c
ERS-8610:5# config ethernet 1/1/ remote-mirroring enable true
Remote mirroring configuration
July 2013
161
Advertisement
Table of Contents
Troubleshooting
