Avaya 8800 Troubleshooting Manual page 66

Common error log messages
Name
starting with 'rcdI'
suppressed.
Code=0x3d0004 chCardIn:
can't initialize a non
ETICKET card in Enhanced
operational mode
Card taken off-line:
Slot=1 Type= --
dpmDoSlotState: reset
slot 1 - SM handshake
fail
Initializing 8691SF in
slot #5 ...
Swip Address Line test
failed for Slot 5
SWIP SRAM Address Test
in slot 5 FAILED init
cardInitModule:
Rebooting because my SF
in slot 5 FAILED init
CPU6 [03/13/08 04:17:16]
SW INFO msgControl:
messages starting with
'smlt' suppressed. CPU6
[03/13/08 04:17:16] MLT
INFO smltRemote is False
for this mac.
10:54:40] HW WARNING
opCheckGigOctaPid:
Octapid Reset OpId = 8
CPU5 [01/11/08 10:54:30]
SNMP INFO Link Up(2/1)
[01/11/08 07:40:49] The
previous message
repeated 8 time(s). CPU5
[01/09/08 11:41:00] HW
INFO System activity
performed
HwCheck: Clock Recovery
Failed Reset tmux on
slot 2
66 Troubleshooting
Description
An R-module is not
recognized correctly when
inserted with enhanced
mode (EOM) enabled, and
fails to come online
(initially). CPU generates
this message
CPU failed to boot.
SMLT informational
message from CPU.
Port 2/1 connects to octapid
8 and the octapid is reset
during the test.
Clock drift has caused
misalignment on the
backplane trap to slot 2. The
tapmux was reset and
synchronized with the CPU
module.
Comments? infodev@avaya.com
Remedial Action
The bootconfig flag control-record-
optimization and enhanced operational
mode flag are legacy flags. Set the flags
to false or disabled:
• Control-record-optimization (config
bootconfig flags control-record-
optimization <false|true>).
• Enhanced-operational-mode (EOM)
(config sys set flags enhanced-
operational-mode <false|true>).
Reseat the SF/CPU.
Use the following commands to
suppress the messages. sys set msg-
control control-interval 30 sys set msg-
control max-msg-num 2 sys set msg-
control enable sys set msg-control
force-msg add smlt If you are still
seeing these messages suppress the
messages on each switch.
Replace the card.
If the message only appears once,
there is no need for concern. If you see
three or more messages a day contact
Avaya Technical Support.
July 2013