Viewing Pruned Multicast Routes; Viewing Multicast Group Sources - Avaya 8800 Troubleshooting Manual

Viewing pruned multicast routes

The Prunes tab shows all of the prunes received for the Group address in the multicast stream
selected from the Mroute-HW table.
Procedure steps
1. In the navigation tree, open the following folders: IP > Multicast.
2. Click the Mroute-HW tab.
3. Click any row in the table.
4. Click Prunes.
Variable definitions
Neighbor
PruneTimer

Viewing multicast group sources

With the Sources tab, you can view all the sources on the subnet that send to the particular
group selected in the Mroute-HW table.
Procedure steps
1. In the navigation tree, open the following folders: IP > Multicast.
2. Click the Mroute-HW tab.
3. Click any row in the table.
4. Click Sources.
Troubleshooting
Variable Value
The IP address of the downstream neighbor from
whom the prune has been received.
The time left for the neighboring downstream router
to send the graft message.
Viewing pruned multicast routes
July 2013 389