Using Cli For Troubleshooting; Using Hardware Record Dumps - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using CLI
trace syslog

Using CLI for troubleshooting

You can use CLI to help provide diagnostic information.
Procedure steps
1. Use this command to disable scrolling of the output display prior to capturing data:
2. Use the more command to view configuration file information:
3. Capture the following command output when any switch problem is observed.

Using hardware record dumps

You can capture a dump of the hardware records for an ingress OctaPID to aid in
troubleshooting. Generally, a verbosity level of 1 suffices.
The dump ar command displays the hardware registers of the RaptARU attached to an
OctaPID.
114 Troubleshooting
Command
config cli more false
more boot.cfg
show tech
show config
show port stats show-all
show port error show-all
When troubleshooting issues specific to a protocol, always use the show-all option
for that command, if it exists.
Comments? infodev@avaya.com
Parameters
destination <ipaddr> [next-hop-
mac <mac>] [port <slot/port>]
[vlan <vlanId>]
enable
disable
info
July 2013