Configuring Aces For Mirroring - Avaya 8800 Troubleshooting Manual
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages) ,
- Configuration manual (226 pages)
Table of Contents
Advertisement
GlobalAction
State
PktType
AceListSize
Configuring ACEs for mirroring
Use an ACE to define the mirroring actions the filter performs.
Prerequisites
• The ACL exists.
• The ACE exists.
Procedure steps
1. In the navigation tree, open the following folders Configuration > Security > Data
2. Click ACL Filters.
Troubleshooting
Variable
Path.
permit as the default. Deny means packets are
dropped; permit means packets are forwarded.
Indicates the action applied to all ACEs that match in
an ACL. Valid options are:
• none
• mirror
• count
• mirror-count
• count-ipfix
• ipfix
• mirror-count-ipfix
• mirror-ipfix
If you enable mirroring, ensure that you specify the
source and destination mirroring ports:
• For R modules in Tx modes: specify ports in the Edit,
Diagnostics, Port Mirrors tab
• For RS/8800 or R modules in Rx modes: specify
ports in the ACE Debug tab
Enables or disables all of the ACEs in the ACL. The
default value is enable.
Specifies IPv4 or IPv6.
Indicates the number of ACEs in a particular ACL.
Configuring ACEs for mirroring
Value
July 2013
83
Advertisement
Table of Contents
Troubleshooting
