<WORD 1-99>
Resetting the PCAP DRAM buffer
You can clear the PCAP DRAM buffer and the PCAP counters.
Prerequisites
• Access Global Configuration mode.
Procedure steps
1. Log on to the Secondary SF/CPU.
2. Disable PCAP:
3. Reset the PCAP engine DRAM buffer:
Modifying PCAP parameters
Certain steps are required to modify PCAP parameters.
Prerequisites
• Access Global and Interface Configuration mode.
Procedure steps
1. In Interface Configuration mode, disable PCAP:
Troubleshooting
Variable
no pcap enable
pcap reset-stat
Specifies pcmcia, flash, or an IP host by IP address and
specifies the PCAP file (.cap). Formats include:
• a.b.c.d:<file>
• /pcmcia/<file>
• /flash/<file>
PCAP configuration
Value
July 2013
255