Enabling And Disabling The Route Switch Processor (Rsp) Packet Tracing - Avaya 8800 Troubleshooting Manual

The clear command allows you to establish a reference list of UP ports and to establish the
last clear timestamps. It also clears any existing port error information.
To provide a useful reference point for the UP ports list, use the clear command when the
network is stable.
Procedure steps
1. To enable KHI globally, enter:
2. To enable port KHI, enter:
3. To display the IP interface KHI information, enter:
4. To clear the IP interface KHI statistics, enter:
Variable definitions
Variable
<true|false>
all
system-stats
state
errors
history
Enabling and disabling the Route Switch Processor (RSP)
packet tracing
Use this procedure to enable and disable the Route Switch Processor (RSP) packet tracing.
Troubleshooting

Enabling and disabling the Route Switch Processor (RSP) packet tracing

config sys set khi khi-enable <true|false>
config sys set khi port-khi-enable <true|false>
show khi port [<all|system-stats|state|errors|history>]
clear khi port
Enables or disables the specified KHI feature.
Displays all port KHI information.
Displays system port statistics for unicast, multicast, and
broadcast packets.
Displays port state (up, down, and health), including the port state
for SMLT and IST ports.
Displays port errors.
Displays the event history (max 10).
Value
July 2013 137