Multicast troubleshooting using the ACLI
Procedure steps
1. To enable or disable the multicast routing process statistics collection, enter:
2. To view the multicast routing process statistics, enter:
3. To display statistics at regular intervals (average of approximately 5 seconds),
4. To clear the multicast routing process statistics, enter:
Variable definitions
Use the information in the following table to use the commands above.
[no]
<grp-ip-list>
[vrf <vrf-name>]
[vrfids <vrfids>]
Job aid: show ip mroute stats command
The following table shows the field descriptions for this command.
418
Troubleshooting
[no] ip mroute stats enable
show ip mroute stats <grp-ip-list> [vrf <vrf-name>] [vrfids
<vrfids>]
enter:
monitor ip mroute stats <grp-ip-list> [vrf <vrf-name>]
[vrfids <vrfids>]
clear ip mroute stats
Variable
Comments? infodev@avaya.com
Disables multicast routing process statistics
collection.
Specifies the multicast group IDs for which to display
statistics. You can specify a maximum of 10 groups.
Specifies the VRF name for which to display
statistics.
Specifies the VRF ID for which to display statistics.
Value
July 2013