Configuring The System Log Table And Severity Level Mappings - Avaya 8800 Troubleshooting Manual

Log configuration using Enterprise Device Manager
OperState
Header
Configuring the system log table and severity level
mappings
Use the system log table to customize the mappings between the severity levels and the type
of alarms.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > Edit >
2. Click System Log.
3. Click the System Log Table tab.
4. Click Insert.
5. Configure the parameters as required.
6. Click Insert.
7. To modify mappings, double-click a parameter to view a list of options. Configure
8. Click Apply.
Variable definitions
Use the information in the following table to help you customize severity level mappings.
Id
IpAddr
UdpPort
278 Troubleshooting
Variable
Diagnostics.
the options as required.
Variable
Comments? infodev@avaya.com
Specifies the operational state of the syslog service.
Specifies the IP header type for the syslog packet. The
options are: default, managementVIP, and
circuitlessIP.
Specifies the ID for the syslog host.
Specifies the IP address of the syslog host.
Specifies the UDP port to use to send messages to the
syslog host (514 to 530).
Value
Value
July 2013