Avaya 8800 Troubleshooting Manual page 203

3. Stop tracing:
4. View the trace results:
5. You can save the trace file to the PCMCIA card for retrieval.
R series modules use different trace commands:
r-module <1-10> trace level [<67-90> <0-4>]
r-module <1-10> trace grep [<WORD 0-1024>]
Variable definitions
Use the information in the following table to help you use the trace command.
grep [<WORD 0-128>]
level [<0-107>]
[<0-4>]
shutdown
screen
Use the information in the following table to help you use the r-module <1-10> trace
commands.
grep [<WORD 0-1024>]
level [<67-90> <0-4>]
Troubleshooting
trace shutdown
show trace file [tail]
save trace
The file is saved with a file name of systrace.txt.
Variable
Variable
Performs a comparison of trace messages (get regular
expression and print [GREP]).
Starts the trace by specifying the module ID and level.
• <0-107> specifies the module ID from 0 to 107.
• <0-4> specifies the trace level from 0 to 4, where 0
is disabled; 1 is very terse; 2 is terse; 3 is very
verbose, 4 is verbose.
Stops the trace operation.
Enables the display of trace output to the screen.
Performs a comparison of trace messages (get regular
expression and print [GREP]).
Starts the trace by specifying the module ID and level.
• <67-90> specifies the module ID.
• <0-4> specifies the trace level from 0 to 4, where 0
is disabled; 1 is very terse; 2 is terse; 3 is very
verbose, 4 is verbose.
General troubleshooting
Value
Value
July 2013 203