Sla Monitor Field Descriptions - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using Enterprise Device Manager

SLA Monitor field descriptions

Use the data in the following table to use the SLA Monitor tab.
Name
Status
CertFileInstallAction
CertFile
ConfiguredAgentAddrType
ConfiguredAgentAddr
ConfiguredAgentPort
ConfiguredServerAddrType
ConfiguredServerAddr
108 Troubleshooting
Description
Enables or disables the SLA Monitor agent.
The default is disabled. If you disable the
agent, it does not respond to discovery
packets from a server.
If you disable the agent because of resource
concerns, consider changing the server
configuration instead, to alter the test
frequency or duration, or the number of
targets.
Installs or uninstalls a Secure Sockets Layer
(SSL) certificate file. The default is
noAction.
Specifies the file name and path of the SSL
certificate.
If you install a certificate on the agent, you
must ensure a matching configuration on the
server.
By default, the agent uses an Avaya SIP
certificate to secure communications with the
server.
Specifies the address type of the agent:
IPv4.
Configures the agent IP address. You must
configure the IP address before the agent
can process received discovery packets
from the server. The default value is 0.0.0.0,
which causes the agent to use the device IP
address.
Configures the UDP port for agent-server
communication. The agent receives
discovery packets on this port. The default is
port 50011. The server must use the same
port.
Specifies the address type of the server:
IPv4.
Restricts the agent to use of this server IP
address only. The default is 0.0.0.0, which
means the agent can register with any
server.
Comments? infodev@avaya.com
July 2013