Port Mirroring Configuration - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using CLI
Mask category
event
warning
init
filter
update
The following tips can help you use the debug commands:
• Display debug commands for multiple mask choices by entering the mask choices
separated by commas, with no space between choice.
For example, to display the global debug command for mask choices error and packet,
use the following command:
config ip bgp global-debug mask error,packet
• Disable the display of debug messages, by using the none mask choice.
For example, to end the display of global debug messages, use the following command:
config ip bgp global-debug mask none
• Save debug messages in a log file, or display the messages on your console.
For example, to display (and log) a debug message, use the following command:
config ip bgp debug-screen [ <setting>]

Port mirroring configuration

You can use port mirroring to aid in troubleshooting procedures.
Port mirroring configuration navigation
• Roadmap of port mirroring CLI commands
• Configuring port mirroring
• Configuring global mirroring actions with an ACL
146 Troubleshooting
Configures the switch to display event debug
messages.
Configures the switch to display warning debug
messages.
Configures the switch to display initialization debug
messages.
Configures the switch to display filter-related debug
messages.
Configures the switch to display update-related debug
messages.
on page 147
on page 148
Comments? infodev@avaya.com
Message
on page 151
July 2013