2. To verify whether the configured route is in the static-mroute table, enter the
Troubleshooting
================================================================
========
Mroute Route - GlobalRouter
================================================================
========
DEST
MASK
----------------------------------------------------------------
--------
20.20.20
255.255.255.255
.2
After you properly configure the static-mroute, the route to destination 20.20.20.2
takes the Multicast route, as shown in the following sample output.
8600# show ip mroute rpf
================================================================
========
Mroute Route - GlobalRouter
================================================================
========
DEST
MASK
----------------------------------------------------------------
--------
20.20.20
255.255.255.255
.2
following CLI command:
show ip static-mroute info
OR
enter the following ACLI command:
show ip static-mroute
Troubleshooting static mroute
RPF
PREF
2.2.2.1
20
RPF
PREF
5.5.5.1
10
OWNER
OSPF
OWNER
MULTICAST
July 2013
373