Prerequisites
• Access Privileged EXEC mode.
Procedure steps
Show the hardware resource usage using the following command:
show ip mroute hw-resource-usage
Job aid: show ip mroute hw-resource-usage command
The following table shows the field descriptions for this command.
Table 33: show ip mroute hw-resource-usage parameter
EGRESS REC IN-USE
INGRESS REC IN-USE
EGRESS THRESHOLD
INGRESS THRESHOLD
LOG MSG ONLY
SEND TRAP ONLY
SEND TRAP AND LOG
Viewing multicast routing process statistics
To provide additional troubleshooting information, you can enable the collection and display
of multicast routing process statistics. These statistics are not related to the interface (port)
statistics. Rather, the statistics are displayed based on VRF and multicast group classification.
To configure multicast routing process statistics, perform the following procedure.
Troubleshooting
Field
Indicates the number of egress records (peps) traversing
the switch that are in use.
Indicates the number of source and group records
traversing the switch that are in use.
Indicates the egress records threshold.
Indicates the source and group records threshold.
Indicates the status of logging messages only.
Indicates the status of sending traps only.
Indicates the status of sending traps and log messages.
Viewing multicast routing process statistics
Description
July 2013
417