Software troubleshooting tool configuration using CLI
Job aid: show test fabric command output
Use the information in the following table to understand the test parameters.
IfIndex
Result
PassCount
FailCount
Testing the ARP address table
You can test the Address Resolution Protocol (ARP) address table for consistency.
Procedure steps
1. Test the address table:
2. Stop the test after a few seconds:
3. View the results of the test:
184
Troubleshooting
Last test results:
IfIndex: 0
Result: success
PassCount: 62115
FailCount: 0
Field
test artable
test stop artable
show test artable
Comments? infodev@avaya.com
Description
Specifies the interface index, if applicable.
Shows the result of the most recently run (or current)
test: none, success, inProgress, notSupported,
unAbleToRun, aborted, failed.
Specifies the number of iterations of the test case that
completed successfully.
Specifies the number of iterations of the test case that
failed.
July 2013