Determining The Data Stream Learned When Ip Multicast Over Spbm Is Configured On The Vlan - Avaya 8800 Troubleshooting Manual

Ethernet routing switch
Table of Contents

Advertisement

Determining the data stream learned when IP multicast over SPBM is configured on the VLAN

QUERIER
QUERY MAXRSPT
WRONG QUERY
JOINS
ROBUST
LAST MEM QUERY
Determining the data stream learned when IP multicast over
SPBM is configured on the VLAN
To determine the data stream learned when IP multicast is configured on the VLAN, use the
following procedure:
Procedure steps
Determine the data stream learned using the following command:
Troubleshooting
Field
Indicates the address of the IGMP querier on the IP
subnet to which this interface is attached.
Indicates the maximum query response time (in tenths
of a second) advertised in IGMPv2 queries on this
interface.
Indicates the number of queries received whose IGMP
version does not match the igmpInterface version. You
must configure all routers on a LAN to run the same
version of IGMP. Therefore, if the interface receives
queries with the wrong version, a configuration error
occurs..
Indicates the number of times IGMP added a group
membership on this interface.
Indicates the robustness variable, which you configure
for the expected packet loss on a subnet. If packet loss
is expected on a subnet, increase the robustness
variable.
Indicates the maximum response time (in tenths of a
second) inserted into group-specific queries sent in
response to leave group messages, and is also the
amount of time between group-specific query
messages. Use this value to modify the leave latency
of the network. A reduced value results in reduced
time to detect the loss of the last member of a group.
This does not apply if igmpInterface version is 1.
Description
July 2013
421

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

8600

Table of Contents