Configuring Port Mirroring - Avaya 8800 Troubleshooting Manual

filter acl ace debug
<1-4096> <1-1000>
filter acl set <1-4096>
mirror-by-port <1-383>
mirror-by-port mirror-port
<1-383> <portList>
mirror-by-port monitor-mlt
<1-383> <1-256>
mirror-by-port monitor-
port <1-383> <portList>
mirror-by-port monitor-
vlan <1-383> <0-4094>

Configuring port mirroring

Use port mirroring to aid in diagnostic and security operations.
Connect the sniffer (or other traffic analyzer) to the output port you specify with out-port
<portList>.
Troubleshooting
Command Parameter
copy-to-primary-cp enable
copy-to-secondary-cp enable
count enable
mirror enable
monitor-dst-mlt <1-256>
monitor-dst-ports <portList>
monitor-dst-vlan <0-4094>
global-action <count|count-
ipfix|ipfix|mirror|mirror-count|
mirror-count-ipfix|mirror-ipfix>
enable
in-port <portList> {monitor-mlt
<1-256>|monitor-vlan <0-4094>|
out-port <portList>}
mode <tx|rx|both|rxFilter|
txFilter|bothFilter>
remote-mirror-vlan-id <0-4094>
Port mirroring configuration
July 2013 237