Viewing The Spbm Multicast Database - Avaya 8800 Troubleshooting Manual

Multicast troubleshooting using EDM

Viewing the SPBM multicast database

You can determine the database used by the SPBM multicast module by using the following
procedure:
Procedure steps
1. In the navigation tree, open the following folders: Configuration > ISIS > SPBM .
2. Click the IpMcastRoutes tab.
Variable definitions
Use the information in the following table to use the IpMcastRoutes tab.
Group
Source
VsnIsid
DataIsid
SourceBeb
Access Recv
Network Recv
Total number of SPBM
IP_MULTICAST Route entries
396 Troubleshooting
Field
Specifies the group IP address for the IP multicast route
Specifies the IP address where the IP multicast route
originated from
Specifies the VSN I-SID
Specifies the VRF ID for the Multicast route
Specifies the source BEB for the IP multicast route
Indicates that the data is received at the UNI ports
Indicates that the data is received at the SPBM cloud
Specifies the number of SPBM IP multicast route entries
Comments? infodev@avaya.com
Description
July 2013