Viewing Multicast Routes - Avaya 8800 Troubleshooting Manual

Multicast troubleshooting using EDM
OutPort
OutLPort

Viewing multicast routes

The multicast route table contains multicast routing information for all group addresses.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > IP >
2. Click the Mroute-HW tab.
Variable definitions
Use the information in the following table to configure the Mroute-HW tab.
GroupAddress
SrcSubnet
Invlan
Pruned
388 Troubleshooting
Variable
Displays the egress port for the multicast group.
Displays the egress wireless tunnel for the multicast
group.
Multicast.
Variable
Comments? infodev@avaya.com
Value
Value
Specifies the IP Multicast group address for the
multicast stream.
Specifies the network address of the source subnet
that has sources sending IP Multicast traffic to the
GroupAddress.
There can be several sources sending to that Group.
You can use the Source tab to view these sources.
Specifies the ingress VLAN ID where the traffic
emanates for the multicast stream.
Specifies whether the route had been pruned. True
indicates that the multicast stream has been pruned.
July 2013