Running A Ping Test - Avaya 8800 Troubleshooting Manual

Running a ping test

Use Ping to determine if an entity is reachable.
Procedure steps
1. In the navigation tree, open the following folders Configuration > Edit >
2. Click Ping/Trace Route.
3. Click Insert.
4. In the OwnerIndex box, type the owner index.
5. In the TestName box, type the name of the test.
6. In the TargetAddress box, type the host IP address.
7. From the AdminStatus options, choose enabled or disabled.
8. In the remainder of the option boxes, type the desired values.
9. Click Insert.
10. Select an entry.
11. Click Start.
Variable definitions
Use the information in the following table to help you use Ping.
OwnerIndex
TestName
TargetAddressType
TargetAddress
DataSize
Troubleshooting
Diagnostics.
Variable
Provides access control by a security administrator using
the View-Based Access Control Model (VACM) for
tables in which multiple users may need to independently
create or modify entries. This is a string of up to 32
characters.
Specifies the name of the Ping test.
Specifies the type of host address to be used at a remote
host to perform a ping operation.
Specifies the host address to be used at a remote host
to perform a ping operation.
Specifies the size of the data portion (in octets) to be
transmitted in a ping operation. The default is 16.
Running a ping test
Value
July 2013 97