Determing The Protocol Configured On The Added Vlan - Avaya 8800 Troubleshooting Manual

Table 34: show ip mroute stats <grp-ip-list> parameters
GroupAddress
SourceCounter
ForwardPackets
ForwardBytes
AverageSize
Packets/Second
DropPackets
DropBytes

Determing the protocol configured on the added VLAN

The protocol configured on the added VLAN can be one of the following values:
• snoop
• snoop-spb
• routed-spb
• pim
Troubleshooting
Field
Specifies the multicast group IP address for which
statistics are displayed.
Specifies the source number corresponding to the
associated VRF and group IP address in the whole
multicast route records.
Specifies the number of normally forwarded packets for
the associated VRF and group IP address.
Specifies the number of normally forwarded bytes for the
associated VRF and group IP address.
Specifies the average packet length for the associated
VRF and Group IP address. This indicates only the
forward packet length. It is calculated using forward
packet/forward byte.
This field is only valid in the monitor CLI output. It specifies
the average speed in about 5 seconds. It is it calculated
from (current forward packet – last forward packet)/
monitor interval. With the first monitor multicast statistics
output, this field is null. Subsequent outputs provide valid
values.
Specifies the number of dropped packets for the
associated VRF and Group IP address.
Specifies the number of dropped bytes for the associated
VRF and Group IP address.
Determing the protocol configured on the added VLAN
Description
July 2013 419