Configuring Logging - Avaya 8800 Troubleshooting Manual

del <str>
info

Configuring logging

When enabled, CLI logging keeps track of the CLI commands that are run on the switch. Use
CLI logging for fault management purposes.
Procedure steps
1. To enable or disable CLI logging, enter the following command:
2. To change the maximum file size used for CLI logs:
3. Ensure that the configuration is correct:
4. To view the CLI log:
Variable definitions
Use the information in the following table to help you use the config cli clilog
commands.
enable <true|false>
Troubleshooting
Variable
config cli clilog enable <true|false>
config cli clilog maxfilesize <64 to 256000>
config cli clilog info
show cli clilog info
show clilog file [tail] [grep <value>]
Variable
Value
the first four bytes matching one of the patterns in
the force-msg table undergo the configured
message control action. You can specify up to 32
different patterns in the force-msg table including a
wild-card pattern (****). When specifying the wild-
card pattern, all messages undergo message
control.
Deletes a forced message control pattern.
Displays the current configuration.
Enables or disables CLI logging.
Configuring logging
Value
July 2013 307