Configuring Chassis Khi - Avaya 8800 Troubleshooting Manual

3. To display the management KHI information, enter:
Variable definitions
Variable
<true|false>
[all]
[history]

Configuring chassis KHI

Use this procedure to configure chassis KHI.
Chassis KHI displays the chassis key health indicators, such as temperature, fans, power
supply, slots and CPU state.
Procedure steps
1. To enable the KHI feature globally, enter:
2. To enable the chassis KHI feature, enter:
3. To display chassis KHI information, enter:
4. To clear chassis KHI statistics, enter:
Important:
When the switch is running with a single SF/CPU and the HA flag is on, if you enter the
show khi chassis command, the standbyMezz state appears as unsupported
yellow. The state shows unsupported because this is not a supported configuration, and
yellow because the configuration does not cause an outage.
Troubleshooting
config sys set khi mgmt-khi-enable <true|false>
show khi mgmt [all] [history]
Enables or disables the specified KHI feature.
Displays all management KHI information, including the event
history.
Displays the event history (max 10).
config sys set khi khi-enable <true|false>
config sys set khi chassis-khi-enable <true|false>
show khi chassis
clear khi chassis
Collecting Key Health Indicator (KHI) information
Value
July 2013 131