Avaya 8800 Troubleshooting Manual page 404

Multicast troubleshooting using CLI
{enable|disable}
<grp-ip-list>
[vrf <vrf-name>]
[vrfids <vrfids>]
Job aid: show ip mroute stats command
The following table shows the field descriptions for this command.
Table 25: show ip mroute stats parameters
GroupAddress
SourceCounter
ForwardPackets
ForwardBytes
AverageSize
Packets/Second
DropPackets
DropBytes
404 Troubleshooting
Variable
Enables or disables multicast routing process statistics
collection
Specifies the multicast group IDs for which to display
statistics. You can specify a maximum of 10 groups.
Specifies the VRF name for which to display statistics
Specifies the VRF ID for which to display statistics
Field
Specifies the multicast group IP address for which to
display statistics
Specifies the source number corresponding to the
associated VRF and group IP address in the whole
multicast route records
Specifies the number of normally forwarded packets for
the associated VRF and group IP address
Specifies the number of normally forwarded bytes for the
associated VRF and group IP address
Specifies the average packet length for the associated
VRF and Group IP address. This indicates only the
forward packet length. It is calculated using forward
packet/ forward byte.
This field is only valid in the monitor CLI output. It specifies
the average speed in about 5 seconds. It is it calculated
from (current forward packet – last forward packet)/
monitor interval. With the first monitor multicast statistics
output, this field is null. Subsequent outputs provide valid
values.
Specifies the number of dropped packets for the
associated VRF and Group IP address
Specifies the number of dropped bytes for the associated
VRF and Group IP address
Comments? infodev@avaya.com
Value
Description
July 2013