Avaya 8800 Troubleshooting Manual page 406

Multicast troubleshooting using CLI
QUERY INTVL
MODE
STATUS
VERS
OPER VERS
QUERIER
QUERY MAXRSPT
WRONG QUERY
JOINS
ROBUST
LAST MEM QUERY
406 Troubleshooting
Field
Indicates the frequency at which the interface
transmits IGMP host query packets
Specifies the protocol used on the added VLAN. The
value is snoop, snoop-spb, routed-spb or pim.
Indicates the activation of a row that enables IGMP on
the interface. The destruction of a row disables IGMP
on the interface.
Indicates the version of IGMP that is running on this
interface. This object configures a router capable of
running either version. For IGMP to function correctly,
you must configure all routers on a LAN to run the
same version of IGMP.
Indicates the operational version of IGMP
Indicates the address of the IGMP querier on the IP
subnet to which this interface is attached
Indicates the maximum query response time (in tenths
of a second) advertised in IGMPv2 queries on this
interface
Indicates the number of queries received whose IGMP
version does not match the igmpInterface version. You
must configure all routers on a LAN to run the same
version of IGMP. Therefore, if the interface receives
queries with the wrong version, a configuration error
occurs.
Indicates the number of times IGMP added a group
membership on this interface
Indicates the robustness variable, which you configure
for the expected packet loss on a subnet. If packet loss
is expected on a subnet, increase the robustness
variable.
Indicates the maximum response time (in tenths of a
second) inserted into group-specific queries sent in
response to leave group messages, and is also the
amount of time between group-specific query
messages. Use this value to modify the leave latency
of the network. A reduced value results in reduced
time to detect the loss of the last member of a group.
This does not apply if igmpInterface version is 1.
Comments? infodev@avaya.com
Description
July 2013