Avaya 8800 Troubleshooting Manual page 82

Software troubleshooting tool configuration using Enterprise Device Manager
4. In the GlobalAction column, double-click a row and configure the desired mirror
5. Click Apply.
6. For R modules in Tx modes, choose Edit > Diagnostics > General > Port
Variable definitions
Use the information in the following table to help you configure port mirroring using ACLs.
AclId
ActId
Type
Name
VlanList
PortList
DefaultAction
82 Troubleshooting
option.
Mirrors, and configure the mirroring ports.
OR
For RS/8800 or R modules in Rx mode: specify mirroring ports in the ACE Debug
tab. On the ACL tab, select an ACL, click ACE, select an ACE, then click Action/
Debug.
Variable
Comments? infodev@avaya.com
Specifies a unique identifier for the ACL from 1 to
4096.
Specifies a unique identifier for the ACT entry from 1
to 4096.
Specifies whether the ACL is VLAN or port-based.
Valid options are:
• inVlan
• outVlan
• inPort
• outPort
Important:
The inVlan and outVlan ACLs drop packets if you
add a VLAN after ACE creation. For VLAN-based
filters, ensure the ACE uses R module slots,
irrespective of the VLAN port membership on a
slot.
Specifies a descriptive, user-defined name for the
ACL.
For inVlan and outVlan ACL types, specifies all VLANs
associated with the ACL.
For inPort and outPort ACL types, specifies the ports
associated with the ACL.
Specifies the action taken when none of the ACEs in
the ACL match. Valid options are deny and permit, with
Value
July 2013