Chapter 18: Log configuration using the
Use log files and messages to help perform diagnostic and fault management functions.
Roadmap of ACLI log commands
The following roadmap lists some of the ACLI commands and their parameters that you can
use to complete the procedures in this section.
Privileged EXEC mode
clear logging
show clilog
show clilog file [tail]
[grep <WORD 1-256>]
show logging
Global Configuration mode
boot config logfile <64-500>
<500-16384> <10-90>
boot config flags logging
clilog enable
clilog maxfilesize <64 to
256000>
Troubleshooting
ACLI
Command
Parameter
config
file [tail] [category <WORD
0-100>] [severity <WORD 0-25>]
[CPU <WORD 0-25>] [name-of-file
<WORD 1-99>] [save-to-file
<WORD 1-99>]
level
transferFile <1-10>
July 2013
323