Viewing Ping Probe History - Avaya 8800 Troubleshooting Manual

IfIndex
ByPassRouteTable
DSField

Viewing ping probe history

You can view the history of Ping tests performed by the switch.
Procedure steps
1. In the navigation tree, open the following folders Configuration > Edit >
2. Click Ping/Trace Route.
3. Select a Ping entry.
4. Click Ping Probe History.
Variable definitions
Use the information in the following table to help you understand Ping historical data.
OwnerIndex
TestName
Index
Response
Status
LastRC
Troubleshooting
Variable
Diagnostics.
Variable
Setting this object to an interface's ifIndex, prior to
starting a remote ping operation, directs the ping probes
to be transmitted over the specified interface.
Enables (optionally) the bypassing of the route table.
Specifies the value to store in the Differentiated Services
(DS) field in the IP packet used to encapsulate the ping
probe.
Specifies the owner index.
Indicates the name given to the test.
Specifies the index number.
Indicates the amount of time, measured in milliseconds,
between request (probe) and response, or when it timed
out. Response is reported as 0 when it is not possible to
transmit a probe.
Indicates the status of the response; the result of a
particular probe done by a remote host.
Indicates the last implementation-method-specific reply
code (RC) received. If ICMP Echo is used, then a
successful probe ends when an ICMP response is
Viewing ping probe history
Value
Value
July 2013 99