6. In the Subtree box, type subtree location information in x.x.x.x.x.x.x.x.x.x. format.
7. In the Mask box, type the mask location in hex string format.
8. From the Type options, select included or excluded to set filter flag.
9. Click Insert.
Variable definitions
Use the information in the following table to configure a filter profile.
NotifyFilterProfileName
Subtree
Mask
Type
Enabling SNMP trap logging
You can save a copy of all SNMP traps and view them.
Procedure steps
1. In the navigation tree, open the following folders: Configuration > Edit >
2. Click General.
3. Click the Error tab.
4. Select AuthenticationTraps.
5. Click Apply.
Troubleshooting
Variable
Specifies the name of the filter profile to use to generate
notifications.
Specifies the MIB subtree that, when combined with Mask,
defines a family of subtrees which are included in or
excluded from the filter profile. For more information, see
RFC 2573.
Specifies the bit mask (in hexadecimal format) that, in
combination with Subtree, defines a family of subtrees,
which are included in or excluded from the filter profile.
Indicates whether the family of filter subtrees are included
in or excluded from a filter.
Diagnostics.
Enabling SNMP trap logging
Value
July 2013
275