Avaya 8800 Troubleshooting Manual page 62

Common error log messages
Name
62 Troubleshooting
Description
loaded
from file /flash/boot.cfg
Press to stop auto-boot...
3 monitor# priv Entering
privilege command mode
monitor# mfg-diag
mfg-diag# write
You will be able to see the device which
is not programmed properly. In this
example, the device is 20 (Determine
how many power supplies you have.
Power supply starts from 20,21,22. 20
being the first one, 21 the middle and 22
is for the third slot.)
Enter
device ID.
(0-30) [0]: 20
Type the device number which is not
programmed correctly. The switch
prompts for the information about the
device.
Enter Card Type (in hex)
[0x0]: 0x10900000 ?
Enter
Description (string max
len 32) []: 8001 690W
110/220V AC Power Supply ?
Enter a new description
number (string max len 16)
[]: ?
Enter the value from the sticker on the
Power Supply:
Hw Version (string max len
16) []: ?
Enter the value from the sticker on the
Power Supply:
Part Number (string max
len 16) []: 202067 ?
new Part Number
(string max len 16) []: ?
Press
value.
len 16) []: ?
Press
value.
Comments? infodev@avaya.com
Remedial Action
boot configuration
* monitor/
Enter read
write . The switch prompts for a
Enter i2c device id
to keep the original value
Serial
Date Code
Enter to keep the original
Deviations (string max
Enter to keep the original
Press
Enter a
July 2013