Avaya 8800 Troubleshooting Manual page 158

Software troubleshooting tool configuration using CLI
<mac>] [dstmac <mac>]
[ether-type <ether-type>]
delete
dstmac <DstMac>
enable <true|false>
ether-type <ether-type>
info
158 Troubleshooting
Variable
Comments? infodev@avaya.com
Value
<true|false>
• enables or disables remote
mirroring on the port.
• <source|termination>
mode. Source (the default) means that this
port is the source of packets (remote mirroring
source [RMS]). Termination means that this
port collects mirrored packets (remote
mirroring termination [RMT]).
• srcmac <mac> specifies the source MAC
address in the format
0x00:0x00:0x00:0x00:0x00:0x00.
• dstmac <mac> specifies the destination
MAC address in the format
0x00:0x00:0x00:0x00:0x00:0x00.
• <ether-type> specifies the ether-type of the
remote mirrored packet. The default value is
0x8103.
Deletes the remote mirroring port configuration.
Sets the destination MAC address for use in the
remote mirroring encapsulation header. The
mirrored packet is sent to this MAC address. The
DstMac is used only for RMS ports.
For RMT ports, one of the unused MAC
addresses from the switch port MAC address
range is used. This MAC address is saved in the
configuration file.
Enables or disables remote mirroring on the port.
When remote mirroring is enabled, the following
events occur:
• A static entry for the DstMac is added to the
Forwarding Database (FDB). All packets that
come with this remote mirroring DstMac are
sent to the RMT port.
• The switch periodically (once in 10 seconds)
transmits broadcast Layer 2 packets in the
associated VLAN so that all nodes in the
network can learn the DstMac.
Specifies the Ethertype of the remote mirrored
packet. The default value is 0x8103.
Displays the remote mirroring configuration of
the port.
specifies the
July 2013