Configuring Snmp Notify Filter Profile Table Parameters - Avaya 8800 Troubleshooting Manual
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages) ,
- Configuration manual (226 pages)
Table of Contents
Advertisement
Procedure steps
1. In the navigation tree, open the following folders: Configuration > Edit >
2. Click Notify Table.
3. Click Insert.
4. In the Name box, type a notify table name.
5. In the Tag box, type the transport tag for the table.
6. From the Type options, select a type.
7. Click Insert.
Variable definitions
Use the information in the following table to configure an SNMP notify table.
Name
Tag
Type
Configuring SNMP notify filter profile table parameters
Configure the profile table to associate a notification filter profile with a particular set of target
parameters.
Troubleshooting
SNMPv3.
Variable
Specifies a unique identifier.
Specifies the tag.
Determines the type of notification generated. This value
is only used to generate notifications, and is ignored for
other purposes. If an SNMP entity only supports
generation of Unconfirmed-Class PDUs, this parameter
may be read-only.
• trap—messages generated contain Unconfirmed-
• inform—messages generated contain Confirmed-
Configuring SNMP notify filter profile table parameters
Value
Class PDUs
Class PDUs
July 2013
273
Advertisement
Table of Contents
Troubleshooting
