Configuring Performance Khi - Avaya 8800 Troubleshooting Manual

Prerequisites
• Log on to Global Configuration mode.
Procedure steps
1. To enable KHI globally, enter:
2. To enable chassis KHI, enter:
3. To display chassis KHI information, enter:
4. To clear chassis KHI statistics, enter:
Important:
When the switch is running with a single SF/CPU and the HA flag is on, if you enter the
show khi chassis command, the standbyMezz state appears as unsupported
yellow . The state shows unsupported because this is not a supported configuration, and
yellow because the configuration does not cause an outage.
Variable definitions
[no]
[all]
[history]

Configuring Performance KHI

Performance KHI displays the performance key health indicators, such as utilization status for
CPU and switch fabric.
Troubleshooting
[no] khi enable
[no] khi chassis
show khi chassis [all] [history]
clear khi chassis
Variable
Collecting Key Health Indicator (KHI) information
Value
Disables the specified KHI feature.
Displays all chassis KHI information,
including the event history.
Displays the event history (max 10).
July 2013 219