AdminStatus
MaxRows
TrapGeneration
Descr
CreateHopsEntries
Type
Viewing traceroute results
You can view the results of traceroute tests.
Procedure steps
1. In the navigation tree, open the following folders Configuration > Edit >
2. Click Ping/Trace Route.
3. Click the Trace Route Control tab.
4. Select a traceroute entry.
5. Click Trace Route Result.
Troubleshooting
Variable
Diagnostics.
Specifies the desired state for TraceRouteCtlEntry. The
options are enabled or disabled.
Specifies the maximum number of entries allowed in the
TraceRouteProbeHistoryTable.
Determines when to generate a notification for this entry.
The options are:
• PathChange—Generate a TraceRoutePathChange
notification when the current path varies from a
previously determined path.
• TestFailure—Generate a TraceRouteTestFailed
notification when the full path to a target can't be
determined.
• TestCompletion—Generate a
TraceRouteTestCompleted notification when the path
to a target has been determined.
Describes the remote trace route test.
Keeps the current path for a trace route test in the
TraceRouteHopsTable on a per hop basis when the
value of this object is true.
Reports or selects the implementation method to be
used for performing a trace route operation.
Viewing traceroute results
Value
July 2013
103