Remote Mirroring Configuration - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using CLI
4. Enable ACT 2:
5. Create ACL 1 with type ingress VLAN:
6. Add ingress VLAN of 220 to ACL 1:
7. Add ACE 1 with action of permit to mirror ICMP traffic:
8. Add ACE 2 with action of permit to mirror TCP traffic with a destination port range

Remote mirroring configuration

Use remote mirroring to aid in troubleshooting procedures.
156 Troubleshooting
ERS-8610:5# config filter act 2 protocol tcpDstPort
ERS-8610:5# config filter act 2 apply
ERS-8610:5# config filter acl 1 create inVlan act 2
ERS-8610:5# config filter acl 1 vlan add 220
ERS-8610:5# config filter acl 1 ace 1 create name icmp
ERS-8610:5# config filter acl 1 ace 1 action permit
ERS-8610:5# config filter acl 1 ace 1 debug mirror enable
mirroring-dst-ports 3/48
ERS-8610:5# config filter acl 1 ace 1 ip ip-protocol-type eq
icmp
ERS-8610:5# config filter acl 1 ace 1 enable
from 20 to 500:
ERS-8610:5# config filter acl 1 ace 2 create name tcp_range
ERS-8610:5# config filter acl 1 ace 2 action permit
ERS-8610:5# config filter acl 1 ace 2 debug mirror enable
mirroring-dst-ports 3/48
ERS-8610:5# config filter acl 1 ace 2 ip ip-protocol-type eq
tcp
ERS-8610:5# config filter acl 1 ace 2 protocol tcp-dst-port
eq 20-500
ERS-8610:5# config filter acl 1 ace 2 enable
Comments? infodev@avaya.com
July 2013