Avaya 8800 Troubleshooting Manual page 145

2. Display specific debug messages for your global BGP neighbors using the following
3. Display specific debug messages for BGP peers or peer group using the following
4. Run BGP trace using the following command:
Variable definitions
Use the information in the following table to use the global-debug mask commands.
<nbr_ipaddr|peer-group-name>
<value>
Job aid
Use debug command mask values to control debug messages for global BGP message types,
and for message types associated with a specified BGP peer or peer group.
Table 12: Job aid: mask categories and messages
Mask category
none
all
error
packet
Troubleshooting
config ip bgp global-debug mask <value>
command:
config ip bgp neighbor-debug-all mask <value>
command:
config ip bgp neighbor <nbr_ipaddr|peer-group-name> neighbor-
debug mask<value>
trace level 52 3
Variable
Specifies the peer IP address or the peer group
name.
Specifies one or more mask choices that you enter
separated by commas with no space between choices.
For example: [<mask>,<mask>,<mask>...]. The mask
can be: none, all, error, packet, event, trace, warning,
state, init, filter, update.
Message
Disables the display of all debug messages.
Configures the switch to display all categories of debug
messages.
Configures the switch to display error debug
messages.
Configures the switch to display packet debug
messages.
Using BGP debugging commands
Value
July 2013 145