Using Hardware Record Dumps - Avaya 8800 Troubleshooting Manual
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages) ,
- Configuration manual (226 pages)
Table of Contents
Advertisement
2. You can view configuration file information using the more command, for example:
3. The following command output should be captured when any switch problem is
Using hardware record dumps
To aid in troubleshooting, a dump of the hardware records from an ingress OctaPID can be
captured. Generally, a verbosity level of 1 suffices.
The dump ar command displays the hardware registers of the RaptARU attached to an
OctaPID.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
To dump hardware record information, enter the following command:
dump ar <0-64> <WORD 1-1536> <0-3>
For example, dump all hardware records from OctaPID 0 slot 1 port 1 with a verbosity
level of 3:
dump ar 0 all 3
Variable definitions
Use the information in the following table to help you use the dump command.
Troubleshooting
terminal more disable
more boot.cfg
observed.
show tech
show running-config [verbose] [module <cli|sys|web|rmon|
vlan|port|qos|traffic-filter|mlt|stg|ip|ipx|diag|dvmrp|
radius|ntp|lacp|naap|cluster|bootp|filter|ipv6>]
show interfaces FastEthernet statistics
show interfaces FastEthernet error
General troubleshooting
July 2013
201
Advertisement
Table of Contents
Troubleshooting
