Configuring The Proxy Arp - Avaya 5000 Series Troubleshooting Manual

Procedure
1. Navigate to the Globals tab.
2. Change the timeout value.
3. Click the Apply button.
Configuring ARP timeout using SNMP
About this task
You can use Simple Network Management Protocol (SNMP) to set the ARP timeout.
Procedure
1. Use the snmp set command on the rcArpExtLifeTime object.
2. Use the snmp get command on the rcArpExtLifeTime object to verify the
Checking ASCII configuration generator
About this task
You can use the ASCII Configuration Generator to display the static ARP entries and for the
ARP timeout.
Procedure
1. Use the show running-config command.
2. Review the output in the L3 section.

Configuring the proxy ARP

About this task
You can enable or disable the Proxy ARP.
Task flow: Configuring the proxy ARP
You can use the following task flow to help you enable or disable Proxy ARP.
Troubleshooting
value.
ARP not forwarding traffic correctly
December 2013 147