8010, 8006, and 8003-R chassis installation
Chassis
8006
8003-R
Installing the cable management brackets
Install the cable management brackets to keep cable clusters fastened and out of the way but
still accessible for maintenance.
Procedure steps
1. Loosen, but do not remove, the rack-mounting screws needed to install one cable
50
Installation — Chassis
9.7
7
management brackets.
For more information about loosening the rack-mounting screws, see
Loosening the rack-mounting screws: 8010 chassis
Loosening the rack-mounting screws: 8006 chassis
Loosening the rack-mounting screws: 8003-R chassis
Figure 22: Loosening the rack-mounting screws: 8010 chassis
Comments? infodev@avaya.com
Rack units
16.9
12.25
Inches
Figure 22:
on page 50,
Figure 23:
on page 51, and
Figure 24:
on page 51.
November 2012