Chapter 9: Troubleshooting Ipv6; No Response To Switch Ipv6 Address Ping; Verifying The Global Ipv6 Administration Status; Verifying Ipv6 Status On The Management Vlan - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Chapter 9: Troubleshooting IPv6

This chapter provides processes you can use to troubleshoot common IPv6 problems.
For detailed information about configuring IPv6, see Configuring Layer 2 on Avaya Virtual Services
Platform 7000 Series, NN47202–502.

No response to switch IPv6 address ping

This section describes the troubleshooting process you can use when attempts to ping the IPv6
address of a switch from another network host fail.

Verifying the global IPv6 administration status

Use this procedure to verify that IPv6 is enabled globally for the switch that does not respond to the
ping.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Use the show ipv6 global command to display the global IPv6 configuration.
3. Observe whether the admin-status is enabled or disabled.
4. If required, use the ipv6 enable command to enable IPv6 globally.
5. You can repeat steps 2 and 3 to confirm the change.

Verifying IPv6 status on the management VLAN

Use this procedure to verify that IPv6 is enabled on the management VLAN for the switch that does
not respond to the ping.
Troubleshooting Avaya VSP 7000 Series
50
Comments on this document? infodev@avaya.com
July 2015