Power Requirements
4286A requires a following power source:
Voltage : 90 to 132 Vac, 198 to 264 Vac
Frequency : 47 to 66 Hz
Power : 500 VA maximum
Ventilation Requirements
To ensure adequate ventilation, make sure that there is adequate clearance of at least 180 mm
behind, 60 mm sides and 15 mm above and below.
Instruction for Cleaning
For cleaning, wipe with soft cloth that is soaked with water and wrung tightly without undue
pressure.
Connecting the Connector Box
The 4286A consists of the mainframe, the test head, and the test xture stand. The test head
has a connector box that connects to the mainframe. This connection is shown in Figure 2-3.
While you connect the connector box to the mainframe, turn o the 4286A.
Installation and Set Up Guide
2-7