Renault Laguna III Manual page 2813

Rear screen wiper motor mechanism: Removal - Refitting
K91, and OPENING REAR SCREEN
a Move the mechanism by its shaft to position the in-
dexing pin in the rear screen wiper motor plate (9) .
a Tighten the rear screen wiper mechanism shaft nut.
a Close the tailgate.
a Open the opening rear screen.
a Tighten the rear screen wiper mechanism nut.
a Refit:
- the mechanism nut cover,
- the mechanism shaft nut cover.
III - FINAL OPERATION.
a Refit:
- the tailgate trim (see Tailgate trim: Removal - Re-
fitting) (MR 416, 73A, Non-side opening elements
trim),
- the rear screen wiper arm (see 85A, Wiping -
Washing, Rear screen wiper arm: Removal - Re-
fitting, page 85A-13) .
WIPING - WASHING
125336
85A-17
85A