Renault Laguna III Manual page 2816

Rear screen wiper motor: Removal - Refitting
K91
NON-OPENING REAR SCREEN
a Disconnect the connector (3) from the rear screen
wiper motor.
a Remove:
- the bolts (4) from the rear screen wiper motor,
- the rear screen wiper motor.
REFITTING
I - REFITTING PREPARATION OPERATION
a Connect the rear screen wiper motor connector.
a Switch on the ignition.
WARNING
T o ensure that the wiper arms can travel
smoothly , the wiper motor must be initialised.
a Move the wiper stalk from (0) to (1), then from (1) to
(0).
a Switch off the ignition.
WIPING - WASHING
127433
85A-20
II - REFITTING OPERATION FOR PART
CONCERNED
OPENING REAR SCREEN
a Refit:
- the rear screen wiper motor ,
- the rear screen wiper motor bolts coated with
FRENETANCHE (see Vehicle: Parts and con-
sumables for the repair) (04B, Consumables -
Products).
a Ensure that the rear screen wiper mechanism index-
ing pin is correctly fitted in the motor plate (5) .
NON-OPENING REAR SCREEN
a Refit:
- the rear screen wiper motor ,
- the rear screen wiper motor bolts coated with
FRENETANCHE (see Vehicle: Parts and con-
sumables for the repair) (04B, Consumables -
Products).
III - FINAL OPERATION.
a Refit the tailgate trim (see Tailgate trim: Removal -
Refitting) (73A, Non-side opening elements trim).
85A
125336