Texas Instruments TMS320C6201 Reference Manual page 420

Available Interrupt Sources
Table 13–2. TMS320C6211/C6711 Available Interrupts
13-4
The EDMA controller in the 'C6211/C6711 device has 16 channels; each trig-
gered by a specific event. As in the other 'C6000 platform of devices, the
'C6211/C6711 CPU has 12 interrupts available for use. Although there is provi-
sion for 32 interrupt sources, the 'C6211/C6711 provides for 13 interrupt
sources. As shown in Table 13–2, the four DMA interrupts in existing
'C6201/'C6701/'C6202 devices are replaced with a single EDMA interrupt
(EDMA_INT) which is described in EDMA Controller chapter 6, section 6.13
EDMA Interrupt Generation .
Interrupt
Selection Interrupt
Number Acronym
00000b DSPINT
00001b TINT0
00010b TINT1
00011b SD_INT
00100b EXT_INT4
00101b EXT_INT5
00110b EXT_INT6
00111b EXT_INT7
01000b EDMA_INT
01001b Reserved
01010b Reserved
01011b Reserved
01100b XINT0
01101b RINT0
01110b XINT1
01111b RINT1
other
Interrupt Description
Host port host to DSP interrupt
Timer 0 interrupt
Timer 1 interrupt
EMIF SDRAM timer interrupt
External interrupt 4
External interrupt 5
External interrupt 6
External interrupt 7
EDMA channel (0 through 15) interrupt
Not used
Not used
Not used
McBSP 0 transmit interrupt
McBSP 0 receive interrupt
McBSP 1 transmit interrupt
McBSP 1 receive interrupt
Reserved