Chrysler 2005 Crossfire SRT6 Service Manual page 610

7 - 66 ENGINE
9. Rotate the belt tensioner counterclockwise and
install the accessory drive belt.
10. Release the belt tensioner and remove the
wrench.
11. Install the radiator fan. (Refer to 7 - COOLING/
ENGINE/RADIATOR FAN - INSTALLATION).
12. Install the engine cover (1). Align the engine cover
retaining clips to the rubber mounts, and push
down firmly to connect engine cover to rubber
mounts.
Note: To ease the installation of the engine cover,
apply a small amount of lubricant to the engine
cover rubber mounts.
13. Install the air cleaner inlet tubes (2).
14. Connect the negative battery cable.
15. Fill the cooling system. (Refer to 7 - COOLING/
ENGINE/COOLANT
DURE).
16. Start the engine and check for coolant leaks.
17. Recheck the coolant level.
- STANDARD PROCE-
ZH